/irs/image_bin/x/9867362.jpg)
/irs/image_bin/x/9929849.jpg)
/irs/image_bin/x/9749765.jpg)
/irs/image_bin/x/9766953.jpg)
/irs/image_bin/x/9935513.jpg)
/irs/image_bin/x/9213781.jpg)
/irs/image_bin/x/9947370.jpg)
/irs/image_bin/x/7175660.jpg)
/irs/image_bin/x/9934258.jpg)
/irs/image_bin/x/8005064.jpg)
/irs/image_bin/x/7627930.jpg)
/irs/image_bin/397311_10.jpg)
/irs/image_bin/x/9514265.jpg)
/irs/image_bin/x/8937803.jpg)
/irs/image_bin/x/9514241.jpg)
/irs/image_bin/x/8923997.jpg)
/irs/image_bin/x/7736592.jpg)
/irs/image_bin/x/4270699.jpg)
/irs/image_bin/x/9620563.jpg)
/irs/image_bin/x/9946652.png)
/irs/image_bin/x/9514302.jpg)
Description
Great condition Laser, race ready for national circuit and competitive club racing. Includes four sails, full XD kit, plus a complete set of spares. Originally owned by Sarah and Steve Cockerill of Rooster Sailing – under my ownership it was mostly sailed on fresh water in the Cotswolds, plus some national events. The last three years have been on the Solent. Hull has always been completely dry, only selling as I spend too much time wing foiling and not enough time hiking in the Laser.
• 1x like new MkII ILCA 7 race sail
• 1x old style standard rig for training
• 1x fairly new radial rig for racing
• 1x old radial rig for training (professional repair in mast sleeve)
• All sails are official with certified orange/red blobs and have their own set of battens
• Full XD kit including Southeast Sailboats 8:1 downhaul with Harken blocks
• Silva racing compass
• 1x radial lower section
• 1x full rig lower section
• 2x aluminium top sections
• 2x aluminium booms
• 1x rudder and 1x daggerboard in good condition (small gelcoat repairs)
• MkII daggerboard friction pad
• Rooster foil bag
• 1x Poseidoncarb low profile carbon tiller
• 1x Rooster carbon tiller extension
• Rooster padded toe strap with Rooster adjustable rigging system
• Launch trolley
• Gorilla top cover
• Spar carriers/deck tidies
• Teflon disk always used to protect mast step from grit
Image with bright yellow tow rope shows the XD kit that I rig the laser with.
Additional full set of XD spares, ideal for regional/national events, includes:
• Spare XD kicker
• Mainsheet
• Sheet horse
• Clew strap
• Primary and secondary control lines
• Outhaul elastic
• Small blocks/pulleys
• Teflon mast disk
• Bung
• Screws, rivets, split pins
• Batten ends
• Rope for hiking strap
Open to sensible offers, this Laser has been raced well and looked after even better. Collection only, located in the Solent.
Specifications
| Vessel type: | Laser / ILCA |
| Designer: | Laser / ILCA |
| Builder: | Laser / ILCA |
| Make: | Laser |
| Model: | Laser 1 |
| Constructed: | 2009 |
| Sail number: | 196523 |
| Length over all: | 4.23m |
| Hull material: | Glass Fibre |
Location Map
Note: Indicated location is approximate general area only.
/irs/image_bin/x/9989305.jpg)
/irs/image_bin/x/9989280.jpg)